Information for the city of Wichita
Wichita is the largest city in Kansas and the seat of Sedgwick County. It is located in the south central part of the state, at the couence of the Arkansas and Little Arkansas rivers. Incorporated as a city in 1870, Wichita is the chief commercial and industrial center of southern Kansas.More or less uninhabited at the time of Kansas's entry into the Union in 1861, the area was first settled by Wichita Indians, who came north from Texas and Oklahoma during the Civil War. At about the same time (during the mid 1860s) a number of trading posts were established at or near the river junction. One of the traders, Jesse Chisholm, pioneered the Chisholm Trail, which passed through Wichita and was the main cattle drive route from Texas to the railroad in Abilene. After the railroad was extended to Wichita in 1872, the city boomed first as a cow town and then later as the trading center in an agricultural and livestock region.
Although the city experienced an economic slump at the end of the 19th century, oil was discovered nearby in 1915, and subsequently the population almost doubled.Aircraft manufacturing began in the 1920s, and Wichita remains a center of the aircraft industry today. In addition, the city also has flour mills, meatpacking plants, and oil refineries. Major manufactures include camping equipment, heaters and air conditioners, and electronics. Wichita has a number of art and historical museums, a zoo, and a planetarium. It is the site of several universities, including Wichita State University (1895). McConnell Air Force Base is nearbyWichita's principal industrial sector is manufacturing, which accounted for 21.6 percent of area employment in 2003. Aircraft manufacturing has long dominated the local economy, and plays such an important role that it has the ability to iuence the economic health of the entire region; the state offers tax breaks and other incentives to aircraft manufacturers.
Healthcare is Wichita's second largest industry, employing approximately 28,000 people in the local area. Since healthcare needs remain fairly consistent regardless of the economy, this field was not subject to the same pressures that affected other industries in the early 2000s. The Kansas Spine Hospital opened in 2004, as did a critical care tower at Wesley Medical Center. In July 2010, Via Christi Health, which is the largest provider of healthcare services in Kansas, opened a hospital that will serve the northwest area of Wichita. Via Christi Hospital on St. Teresa is the system's fifth hospital to serve the Wichita community.Thanks to the early 20th Century oil boom in neighboring Butler County, Kansas, Wichita became a major oil town, with dozens of oil exploration companies and support enterprises. Most famous of these was Koch Industries, today a global natural resources conglomerate, which is still headquartered in Wichita. The city was also at one time the headquarters of the both operate headquarters facilities in Wichita. Koch Industries' primary global corporate headquarters complex is located in a large office tower complex in northeast Wichita. The following is a summary of data regarding the Wichita metropolitan area labor force, 2004 annual average:Size of nonagricultural labor force: 282,800Number of workers employed in:construction and mining: 16,100manufacturing: 58,400trade, transportation and utilities: 49,500information: 6,100financial activities: 12,200professional and business services: 26,300educational and health services: 38,400leisure and hospitality: 25,200other services: 12,100government: 38,500Average hourly earnings of production workers employed in manufacturing: $19.45 (2004)Unemployment rate: 6.3% (February 2005)Aircraft manufacturingFrom the early to late 20th century, aircraft pioneers such as Clyde , ""Matty"" Laird, Lloyd Stearman, Walter Beech, Al Mooney and Bill Lear began aircraft manufacturing enterprises that would lead to Wichita becoming the nation's leading city in numbers of aircraft produced.
(the world's highest volume airplane manufacturer) and craft remain based in Wichita having merged into Aviation in 2014, along with Learjet and Boeing's chief subassembly supplier, Systems. bus maintains a workforce in Wichita, and (parent company of Learjet) has other divisions in Wichita as well. Over 50 other aviation businesses operate in the Wichita MSA, as well dozens of suppliers and subcontractors to the local aircraft manufacturers. In total, Wichita and its companies have manufactured an estimated 250,000 aircraft since Clyde Cessna's first Wichita built aircraft in 1916.In the early 2000s, a national and international recession combined with the after effects of the 9/11/2001 terrorist attacks to depress the aviation sub sector in and around Wichita. Orders for new aircraft plummeted, prompting Wichita's five largest aircraft manufacturers, to slash a combined 15,000 jobs between 2001 and 2004. In response, these companies began developing small and mid sized airplanes to appeal to business and corporate users. In 2007, Wichita built 977 aircraft, ranging from single engine light aircraft to the world's fastest civilian jet; one fifth of the civilian aircraft produced in United States that year, plus numerous small military aircraft. In early 2012, Boeing announced it would be closing its Wichita plant by the end of 2013.
Information for the state of Kansas
The Bureau of Economic Analysis estimates that the total GDP in 2008 was $122.7�billion, making it the United States's 32nd highest state by GDP. The agricultural outputs of the state are cattle, sheep, wheat, sorghum, soybeans, cotton, hogs, corn, and salt. Eastern Kansas is part of the Grain Belt, an area of major grain production in the central United States. The industrial outputs are transportation equipment, commercial and private aircraft, food processing, publishing, chemical products, machinery, apparel, petroleum and mining.
Kansas ranks 8th in U.S. oil production. Production has experienced a steady, natural decline as it becomes increasingly difficult to extract oil over time. Kansas ranks 8th in U.S. natural gas production. Production has steadily declined since the mid-1990s with the gradual depletion of the Hugoton Natural Gas Field the state's largest field which extends into Oklahoma and Texas. The Kansas economy is also heavily influenced by the aerospace industry. Several large aircraft corporations have manufacturing facilities in Wichita and Kansas City, including Spirit AeroSystems, Boeing, Cessna, Learjet, and Hawker Beechcraft (formerly Raytheon).
Get More Money Today. When You Are PAID IN CASH Now!
Wichita Factoring Companies
The main benefit of factoring is that a business is not required to wait one or two months (sometimes more) for payment by a customer, the business will receive cash in hand to operate and grow their business. -Wichita Factoring Companies
FIVE FAMILIAR CASH FLOW TROUBLES WHICH DO YOU WANT TO OVERCOME?
Wichita Factoring Companies Articles
The Difference between Accounts Receivable Financing and Factoring
Today, it’s not as easy for businesses to access finance as it was in past years, and more companies are being forced to look for alternative, non banking financing options in order to access the capital they require to help their business grow.
Two of the more popular tools available to cash strapped business owners are Accounts Receivable Financing (A/R Financing) and factoring. Some business owners believe these two are the same, but there are, in fact, some small yet significant differences.
What Is Factoring?
Factoring is when a commercial finance company, also known as a factor or factoring company, purchases a business’s outstanding accounts receivable. At that time, the factor will typically advance the business somewhere between 70% and 90% of the invoice’s value. Then, once the invoice is collected from the customer, the remaining balance – minus a factoring fee – is released to the business. The factoring fee could range from between 1.5% and 5.5%. It’s calculated on the total face value of the invoice and depends on how many days the funds are in use and other aspects, like the collection risk.
When a business has a factoring contract they can usually choose which invoices they want to sell to the factor: it’s not generally an all or nothing process. Once the factor has purchased an invoice they become responsible for managing the receivable until the account has been paid. Essentially, the factor becomes the business’s accounts receivable department and credit manager, analyzing credit reports, performing credit checks, mailing invoices, and documenting payments.
What Is Accounts Receivable Financing?
Accounts Receivable Financing is more similar to a traditional bank loan, however there are some key differences. Bank loans are secured with collateral; which might be real estate, the business owner’s personal assets, or plant and equipment; whereas Accounts Receivable Financing is backed by the business’s assets related to the Accounts Receivable. When a business has an Accounts Receivable financing agreement, a borrowing base is established at each draw against which the business is able to borrow money: this would typically be between 70% and 90% of the qualified receivables.
Between 1% and 2% is typically charged as a collateral management fee against the outstanding amount, and interest is only calculated as and when the money is advanced. An invoice must be less than 90 days old in order to count towards the borrowing base, and the finance company must deem the business credit worthy. There may also be other conditions to fulfil.
So, you can see that there are many similarities between Accounts Receivable financing and factoring; however, one is the sale of an asset (receivables or invoices) to a third party, while the other is actually a loan. In many ways, though, they do act similarly. Below we’ve listed the main features of each so you can determine which would be the best fit for your company.
Accounts Receivable Financing
• Generally, Accounts Receivable Financing is not as expensive as factoring;
• It can be easier to move from this type of financing to a traditional bank line of credit once a business becomes bankable again;
• Typically, a minimum of $75,000 per month is required in sales to qualify, so this type of financing may not be available to small companies;
• Due to the fact that the business will be required to submit all of its Accounts Receivable to the finance company, this type of financing can be less flexible than factoring.
• It’s quite easy to qualify for factoring, and factoring is the ideal solution for start ups and financially challenged companies;
• Because businesses can decide which invoices they want to sell to the factor, factoring offers more flexibility than Accounts Receivable Financing;
• The company is able to track total costs on an invoice by invoice basis because factoring has a simple and straightforward fee structure.
Today we see both Accounts Receivable Financing and factoring as traditional sources of financing; effective when traditional bank financing is not an option. Factoring can carry a business through a period when an immediate cash input is required.
Somewhere between 12 and 24 months most companies are generally able to repair their financial situation and once again become bankable. However, some companies in certain industries continue factoring their invoices indefinitely.An example of this is the trucking industry, which relies heavily on factoring for cash flow injections.
Get More Money Today. When You Are PAID IN CASH Now!
Wichita Factoring Companies Articles
Bookkeeping Mistakes Commonly Made by Freight Brokers
It’s true that freight brokers shoulder a lot of responsibility; from matching shippers and carriers, to ensuring that each and every piece of cargo arrives at its proper destination. Freight brokers also have the added responsibility of accurate bookkeeping, because failure to prioritize bookkeeping can result in the loss of money.
Below we’ve listed some common bookkeeping mistakes made by freight brokers, and how to avoid them–
Handling the Accounting In-House
Many business owners try to save money by handling the books themselves, or perhaps delegating this very important task to a family member or an inexperienced employee. Sure, you may save time and money initially, but errors can be costly: when you attempt DIY accounting you could well end up with more expensive financing terms, higher bond premiums, or a number of other unforeseen expenses. It’s very important that you hire a competent bookkeeper because, not only will you save money, but you’ll know that the job will be done accurately, quicker, and more efficiently.
We understand only too well that running any business is time-consuming and hard work, and many freight brokers are simply too busy doing their day-to-day tasks to focus on bookkeeping tasks, such as the monthly reconciliation of credit card accounts and bank accounts. It’s through reconciling statements that you get a clear idea of how much credit or cash you actually have, and you can also pick up on any errors that may have occurred.
It can be so tempting to postpone this rather tedious task, but the truth is that your credit card statements and bank statements must be reconciled every month, preferably the moment each statement becomes available. In this way you’ll be able to identify any potential problems in a timely manner; problems such as lost checks, missing deposits, fraudulent charges, and so on.
Failing to Track Invoices and Receivables
You’re not going to get paid if you’re using poor accounting practices with your accounts receivable. Let’s face it, getting paid equals cash, and cash is the lifeblood of every business. An experienced freight broker understands that your cash flow can be strained by the delay between when you pay your carriers and when you receive payment from your customers. If you’re finding that tracking and collecting invoices is taking too long, why not consider invoice factoring? An invoice factoring company will purchase your invoices for a small fee, with the bonus being that you get paid immediately, plus you’re spared the time and expense of having to deal with collections.
Don’t Forget Liabilities
One of the major considerations a surety has when looking at your business financials in order to underwrite a bond is whether you have sufficient assets to cover your liabilities. Many times we see an inexperienced bookkeeper recording a liability, but when the payment is made they forget to reverse the liability. This is a serious error because it results in liabilities being overstated and net income being understated, which makes your business appear to be less financially secure than it really is. These serious errors can be avoided by employing the services of an experienced bookkeeper. We also recommend that you have another set of eyes (which may be an owner or a CPA) regularly review the balance sheet to check for unusual account balances
Too Many Expense Categories
Another common error we often see with inexperienced bookkeepers is creating too many expense categories, or miscategorizing expenses. Generally, most industries and businesses have a standard set of expense categories, and when a loan underwriter or surety sees too many categories, or the miscategorizing of expenses, it stands out like a big red flag. It tells them that your books are not well prepared. Use an accountant or experienced bookkeeper to correctly set up your accounting software right from the beginning, and don’t automatically add new expense categories unless careful consideration has been made. Remember to ask your accountant or CPA for advice, because they’ll be able to guide you on how to classify expenses.
Incomplete Information on Invoices
It’s very important that, when you invoice your customers, you provide sufficient detail on each line item. Do you invoice by weight, per piece, or per mile? Or is the charge a flat fee? If there are additional charges to invoice, such as reimbursements for fuel or fees, these should be listed as separate line items. In addition, these charges must be clearly and accurately detailed in order to avoid any confusion. When you send invoices to your customers that include clear and concise details, it prevents pushback from your clients. If there’s missing information on your invoices and your customers are confused by unrecognizable charges, it could well cause a delay in payment, which is the very last thing business owners need.
Not Understanding the Functionality of Accounting Software
Many freight brokers purchase an accounting software package because they’re anxious to get their business up and running, but they fail to learn how to use it correctly. This is probably not an issue if you’re already outsourcing your accounting and bookkeeping tasks; but if you’re using this software in any way at all, perhaps to enter checks and run reports, it’s important that you spend some time learning how to use all the available functions. When used correctly, the right accounting software can save you a lot of time, in addition to providing real-time information on the state of your business. It’s this information that helps you make important business decisions!
Wichita Factoring Companies Articles
Oilfield Services Factoring Services
Running a company in the oilfield services industry is no easy business, especially with payrolls to meet, equipment to purchase and deadlines that must be met. The sheer complexity of combining the geological research and modeling, imaging and exploration and finally the drilling to see whether oil is really present can take a lot of investment before any payoff can be seen.
For those who own a Frac Sand Hauler for example, the efforts that must be put in to start such as business can be considerable. But arguably the biggest challenge is paying the expenses as the invoices come in. A Frac Sand Hauler often has expenses that must be met immediately, but their invoices can take up to 60 days before they see the money.
What follows is an interview with Ray McClerand, a man who owns a Frac Sand Hauler business and ran into the same difficulties that many new companies of his type face. How Ray overcome some of the challenges in paying his bills through oil service factoring are explained in the interview.
“Welcome Ray, I’d like to know first why you decided to start up a Frac Sand Hauler company and how you prepared for the challenges it created.”
Ray McClerand (RM): “I’ve been in the oil business for the past 15 years or so working on different jobs from roughneck to foreman to deskwork for different companies. A few years ago I saw the potential of having a Frac Sand Hauler business in this area and got together with a couple of partners to create a company. We sat down, went over the details and decided that this would be a real good time to build a business that was serving a particular need in this industry.”
“So, I take it you created a business plan and took out the appropriate loans in order to purchase the equipment and hire the personnel necessary to get your company started?”
RM: “Exactly. Because I had been around this business for a while, I understood what was needed in terms of personnel and equipment. Plus, I had some contacts with others in the business that needed the type of services that a Frac Sand Hauler provides, so I felt that there was some real potential to make a profitable business work.”
“How did it go over the first six months or so?”
RM: “At first, we were really thriving as my contacts had lined up some business my way. Our loans covered the first six months or so of operations and we were doing quite well with the business we had. My partners and I were certainly happy and everything was going good when something really strange happened.”
“Could you elaborate on what you mean by “strange”?
RM: “Yes, after the first five months or so I started getting requests to have our company work with several other businesses in the area. This would mean having to expand our company through buying new equipment and hiring more people. But we did not have the cash on hand to make such a move. We were getting invoices from the businesses that we worked with, but it was taking up to 2 full months before we actually got the cash.”
“So, you were making enough money to expand, but you didn’t have it on hand because of the invoice system?”
RM: “You got it. Add to that our initial money from the loan was running out and we needed to start paying it back as well. I knew that if we didn’t expand and accept the new business that others would step in and we would lose that money. So, we were in a real pickle until I heard about oil service factoring companies.”
“Tell us a bit about oil service factoring and how it helped you out?”
RM: “Well, one of my partners had heard about factoring companies, so we checked it out and decided to go with one that was best suited for our needs. A factoring company buys our invoices with cash so we have money on hand to pay our bills and do what we need accomplished immediately. The factoring company then collects the money from the invoices when they become due. It’s really been a win-win for what we do.”
“That’s interesting. I wonder if you could you explain a little further just how factoring has helped your company?”
RM: “Sure, instead of having to wait up to 60 days before we could collect on the invoices, we were able to have the cash on hand immediately to purchase some new equipment and hire some more people to expand our business. This meant that we could accept the new offers that other businesses were providing for us and not having to pass. I cannot say enough about how factoring really benefitted us when it came to expanding our business.”
“So, it seems like factoring really paid off for you. Do you still use factoring today?”
RM: “Yes we do. Although for the most part we still cash our own invoices, whenever we need money quickly so we can buy some new equipment or expand our business a little further, we go back to the factoring company and cash in our upcoming invoices. It really has worked wonders for our company.”
“Tell me, what would have happened if factoring was not an option?”
RM: Frankly, I don’t know how we could be in the position we are today without factoring. In this business, you have to take advantage of new opportunities quickly because there are other companies out there who will step in if you don’t. Basically, I don’t think we would be anywhere near the company we are today if it had not been for factoring.
There is little doubt that Ray’s company would not be where it was without oil service factoring that allowed him to expand his company when he needed. For those in the oil industry, having your invoices cashed immediately by factoring companies allows greater flexibility so you can grow your business a lot more quickly and take advantage of opportunities.
You Can Find More Information at http://factoringloan.org/
and at www.factoringbusinesses.org/